How To Reset Printer Canon MP 258

Once you understand the error codes and indications, and have tried various ways to cope with the damage on the printer Canon MP 258, if not successful you can try the software resetter

Software resetter for Canon MP258 printer can downlod here, then install it on the computer where the installation of the Canon MP258 printer.

Error Code Canon MP258 Printer

For those of you who have a Canon MP 258 printer, may have experienced problems such as printer jams and can not be used.
And it is usually the printer code found indicators that show the damage to the printer
The following error codes and lighter tips to overcome:

Reset Printer Epson T10 / T 11

There are several types of printers that frequent blinking is a branded printer epson and canon, such as the type for epson T10, T11, T20, C41, C45, C90 for example iP100 canon printers, IP1600, or other IP series. For this time I will discuss is how to reset printer epson t10 and t11 type. Usually this type has been modified by using ink infusion or CISS. Sometime this printer will have full waste ink and printer can not be used. To overcome this problem we will discuss step by step

Problem Head Driver Printer Epson LQ 2190

This experience occurred at the company where I work. At that time there was a mold problem user complaints Epson LQ 2190 printer is not clear.

After the check turns out needle printer head is broken. And immediately I said to the user that the printer should replace the printer head.

After a few days the print head is ready, and I directly install the new print head.

Flashing IC EEPROM Canon ip 2770

If you have a case of the printer canon iP2770 with error indication 5B00, and when going into safe mode always hang marked with orange color (can not change positions to ready and green)., And includes not reset, this time I will share how to overcome it.

Equipment:

1. HIGH SPEED USB ​​PROGRAMMER EZP2010

2. HOT AIR BLOWER / SOLDER UAP

3. IC EEPROM Canon ip 2770 is still normal

4. IC EEPROM error

Printer Canon IP2770 "The Following Ink May Have Run OUT"

Canon Printer IP 2770 after doing reset by resetter software cages when not immediately successful and the printer can be used. It could be an error appears “The following ink may have run out” like the picture bellow:

The solution is:

1. Let the image looks like above, so you will see when the cartridge adjustment  will 

    be reset manual.

2. Perform manual reset by pressing the reset button for 5 minutes, usually at least 1 

    minute can also.

3. Release the reset button.

4. Figure Cartridge seen get in to places cartrigenya and

5. If the image was later changed to the color cartridge out of the cartridge did as the 

    No. 2 and 3.

6. Done

You can cleaned the printer on the waste ink before reset  with manual reset or resetter software.

Hopefully Success...

Reset Printer Canon IP 2770

If you have  Printer CANON IP 2770  may be ever problem with the error code "5200" like picture on the below ,and in the power lamp and resume lights on the printer blinking alternately.

These problems will definitely be experienced after the printer several times replace of  ink.

Now We'll try one of the ways to overcome it.

Before we use the reseter software,the first we need to make printer ip 2770 to service mode position.