Flashing IC EEPROM Canon ip 2770

If you have a case of the printer canon iP2770 with error indication 5B00, and when going into safe mode always hang marked with orange color (can not change positions to ready and green)., And includes not reset, this time I will share how to overcome it.

Equipment:

1. HIGH SPEED USB ​​PROGRAMMER EZP2010

2. HOT AIR BLOWER / SOLDER UAP

3. IC EEPROM Canon ip 2770 is still normal

4. IC EEPROM error

The next step:

1. Grab canon ip 2770 mainboard which normally, then use the blower hot air /   

    steam to lift the IC solder 

    EPPROM of the board, subsequent backups using PROGRAMMER EZP2010 or  

    similar, save the  

    extension *. bin.

2. then repeat the first step on the board that canon ip 2770 error. and 

    restore using PROGRAMMER EZP2010 a way to load that backup file  

    extension *. bin.

3. Replace the IC EEPROM into each board, your printer and try again

    The printer can be used again.

Important:

If you are not familiar with how to use the blower PROGRAMMER EZP2010 and hot air / steam solder, please ask for help to a less expert

Hopefully Helpful...